Amana tool DRB-422 Polycrystaline Diamond (PCD) Tipped Single Flute Down-Shear 3/8 D x 15.35mm (5/8) CH x 3/8 Inch SHK Straight Plunge Router Bit

Single and Double Flute Diamond tipped for cutting composite panels and Fiberglass. Tool life is expected up to 25 times when compared with the carbide tip tooling. Diamond is the hardest material on the earth. Polycrystalline Diamond (PCD) tooling is manufactured in a high-temperature and high-pressure laboratory that fuses diamond particles onto a carbide substrate, which allows the diamond to be brazed onto a tool body. PCD Tooling Benefits: Harder cutting edge provides higher resistance to wearCut thousands of feet more than carbide without changing tool, saving setup timeOptimized machine tool efficiencyQuality of finish is often significantly improvedIf you’re looking for the ultimate in tooling, you’ve found it! Amana Tool's PCD tipped Straight Plunge router bits will cut a wide variety of tough, abrasive materials including composites, particle board, MDF (both raw or with melamine), plywood veneer and fiberglass. The cutting edge lasts much longer than carbide for extremely long life. Excellent for cutting:AluminumAluminum CompositesAluminum Composite Material (ACM)CompositesComposite panelsCustom Composite Materials (CCM)FiberglassFiberglass PCB BoardFiberglass Reinforced CompositesFiber-Reinforced UrethaneFiber-Reinforced Structural Foam FloorsHardwood/SoftwoodLightweight compositesMDFPlastic