Amana DT12840 12"/84T DITEC-2000 TIPS H-ATB

Designed specifically for the Holz-Her® 220mm panel saws.
Resistance to abrasion is the single most important characteristic of the tungsten carbide used for saw teeth.
DITEC™ saw blades feature carbide tips with greater hardness,
with no loss of toughness, than any previous formulation. Using this carbide,
Amana Tool® has produced a line of laser cut saw blades that last 2 to 3 times longer than standard carbide formulations.

The laser cut saw bodies feature expansion slots for great stability and low noise levels.
Every saw blade is analyzed by an innovative and sophisticated computerized system to ensure faultless
quality control. Runout tolerances are maintained at .002" or less. Exceptionally sharp edges are ground
and honed on the carbide tips with 400 and 600 grit diamond wheels.The surface quality of the saw teeth is second to none.

In extensive testing, productivity increases ranging as high as 500% were recorded. The random tests were performed by outside
firms running panel saws 2 to 3 shifts per day.

√ Exclusive DITEC™ Carbide Tips.

√ Higher Reliability & Lower Maintenance.

√ Low Noise Level.

√ Laser Cut Saw Bodies.

√ Excellent Cutting Quality.

√ Economically Priced.

Instructions for grinding:

• For maintenance grinding, use fine grit (D400 to D600) diamond wheels. To match the factory grind, use a slower than normal feed rate.
• Damaged teeth can be replaced by any grade of carbide tooth. Replacing of a large number of teeth  will, of course, shorten the life of the saw blade.
• Since the carbide in the DITEC™ is harder than  other carbides, it is critical that you protect them  from “thermal shock”
  if an adjacent tooth is  replaced. Heat absorbed during the brazing  process will seriously degrade the DITEC™ carbide.